All guides

What Is a Bill of Materials (BOM)? A Guide for Small Manufacturers

A bill of materials is the recipe for a product: every raw material and part, and how much of each, needed to make one unit. Get it right and planning, purchasing and costing all follow.

  • Last reviewed: October 2026
  • For businesses in India

Whether you make boxes, castings, furniture or electrical panels, a BOM answers one question: to make this product, what do we need and how much? Here is how to build and use one.

1What goes into a BOM

  • The finished product and the quantity the BOM is written for (usually one unit, or a batch).
  • Each raw material or part, with its item code and description.
  • Quantity per unit and the unit of measure (kg, metre, sheet, nos).
  • Allowance for wastage or scrap, if the process loses material.
  • Sub-assemblies, where a part is itself made from other parts (a multi-level BOM).

2A worked example

A simple BOM for one wooden study table:

MaterialQuantity per tableUnit
Table top, 120 × 60 cm board1nos
Legs, 72 cm4nos
Wood screws16nos
Wood glue0.05kg
Varnish0.2litre

To make 50 tables, multiply each line by 50: 200 legs, 800 screws, 2.5 kg of glue and 10 litres of varnish. That is your material requirement, before checking what is already in stock.

3What a BOM is used for

  • Material planning: how much to buy for a production order.
  • Issuing material: what the store should hand over for each work order.
  • Costing: the material cost of one unit, from the BOM quantities and purchase prices.
  • Stock accuracy: raw material comes out of stock as it is issued, and finished goods go in as they are made.

4Tips for an accurate BOM

  • Use one unit of measure per item and stick to it in purchase, stock and BOM.
  • Measure real wastage on the shop floor and include it, instead of guessing.
  • Review the BOM whenever the design, a supplier or a material changes.
  • Keep one approved BOM per product so the store and production use the same numbers.

5BOMs and work orders in SIP

In SIP you set up a bill of materials per product, raise work orders and job cards, issue raw material against the order and receive finished goods into stock, with every step recorded against your inventory.

Plan production from your BOM

Bills of material, work orders, job cards, material issue and production receipt.

Manufacturing ERP software

This guide is general information to help you understand the rules, not tax or legal advice. GST rules change from time to time; confirm the details for your business with your CA or on the CBIC website.